Babysense Parent Unit for Video Baby Monitor V24US, White

Important: two parent units cannot be paired with the same camera/s - this unit is a replacement only and should not be purchased/used as a second/additional parent unit on your existing monitor, this new to connect the parent unit to your existing cameras, follow the following procedure: note: before you begin pairing, make sure the child and parent units are side-by-side and powered on. Press the menu/exit key on the parent unit and the menu screen will be displayed. Press the left key or right key until the camera icon is highlighted in red, then press the up or down key to select the desired camera to pair. Press the ok key to start pairing. The camera icon will start flashing to pair the camera. Until the icon flashes, then press and hold the pair button on the back of the baby unit until the connection is established. Once paired, an image from the paired camera will be displayed on the screen. If unsuccessful, please repeat the above step. To exit, press the menu/exit key. Note: if there is more than one camera to pair, repeat the above steps for each camera separately. Camera view - switching between paired cameras: this function is only available when two or more cameras are paired. The following steps must be performed on the parent unit: press the ok key to switch the view to the next paired camera. At the top of the LCD display you will see that it is associated with the number of the camera. Do not attempt to switch between cameras via the menu, as this is for pairing purposes only. Use the ok button instead. Automatic scan (loop) mode: you can also select the scan (loop) mode and each paired camera will be displayed on the screen for 10 seconds and then the screen will automatically switch to the next paired camera. Press the ok key several times until you see the loop sign at the top of the LCD screen.

Features:

• Parental unit for your baby sense video baby monitor v24us
• Requires v24us camera unit to operate - camera unit not supplied
• Supplied with power adapter
• Multi-camera expandable - pair up to four cameras in your v24us parent unit
• Important: two parent units cannot be paired with the same camera - this unit is a replacement only and should not be purchased as a second/additional parent unit to your existing monitor

• Product Length (cm): 18.19
• Product Weight (kg): 0.084
• Baby Gear Type: Baby Monitors
• Baby Brand: Babysense
• Customer Group: Baby Unisex
• Product Width (cm): 8.48
• Product Weight (grams): 84
• Product Height (cm): 6.88